Skip to content
Roadside power, ready now

ANFLAG power when a dead battery stops the trip.

Start with up to 8000A peak current, restore tire pressure with an integrated inflator, and keep phones and essential devices powered from one compact ANFLAG unit.

12V starting systemsUp to 160PSISmart safety clamps
8KUp to 8000A peak
G+DAll gas and diesel
2Y2-year replacement
∞Lifetime support
12Safety protections
24/7Expert support
ANFLAG BD60 all-in-one jump starter with air compressor
Power where the road gets difficult

Three essential tools. One dependable system.

ANFLAG builds high-value roadside power products that combine a powerful jump starter, tire inflator and portable power bank in one compact device.

A dead battery, a soft tire or a low phone can turn a routine drive into a long delay. Our products are designed around the problems drivers actually face, with clear controls, practical accessories and output that is ready when conditions are not.

How ANFLAG engineers readiness
Why ANFLAG

Useful specifications, not empty numbers.

Real roadside value comes from matching high starting output with the controls and supporting tools that make it usable in a stressful moment.

01

Peak current with purpose

A higher peak rating provides the short burst of current needed to turn larger engines and helps preserve a working margin in cold weather. Always select a model that matches your engine type and displacement.

02

Inflation without another tool

An integrated 150PSI or 160PSI compressor lets you correct a low tire at the curb. Digital presets, live pressure readings and automatic stop make the process controlled and repeatable.

03

A genuinely road-ready kit

Smart clamps, emergency lighting, device outputs, inflation nozzles and a carry case turn stored battery capacity into a complete response system that is simple to keep in the vehicle.

Core capabilities

Built around the next problem.

Each function earns its place by helping a driver solve a common roadside interruption quickly and safely.

A

Peak Starting Power

Up to 8000A of starting current supports vehicles from motorcycles and passenger cars to trucks, boats and work equipment.

PSI

Built-In Tire Inflator

Select models deliver up to 160PSI with digital presets, live readings and automatic shutoff.

USB

Portable Power Bank

Charge phones, tablets and other devices through USB-A and USB-C outputs on compatible models.

LED

Ultra-Bright Lighting

Flashlight, SOS and strobe modes provide visibility for repairs, signaling and nighttime setup.

FS

Force Start

A dedicated emergency mode can help activate smart clamps when battery voltage is too low for normal detection.

V-0

Rugged Protection

Fire-resistant materials and intelligent circuitry guard against common connection and thermal faults.

Smart clamp architecture

Power only works when control comes first.

ANFLAG intelligent clamps monitor connection and operating conditions before and during a jump. Clear indicators help the user correct a poor connection before starting.

12layers of protection on select models
01

Reverse Polarity

02

Overcurrent

03

Short Circuit

04

Overheating

05

Overvoltage

06

Spark-Free Connection

Featured ANFLAG models

Choose the power that fits your road.

Four leading configurations cover lightweight everyday carry, high-output starting and complete roadside response.

Compare all six models
Ready for real situations

One case in the vehicle. More ways forward.

Dead battery on the road
Start

Dead battery on the road

Flat tire at the curb
Inflate

Flat tire at the curb

Camping and tailgating
Power

Camping and tailgating

Winter cold cranking
Cold

Winter cold cranking

Fleet and job site readiness
Work

Fleet and job site readiness

Manufacturing and reliability

Confidence is built into the parts you cannot see.

Performance begins with component selection and continues through assembly, validation and review.

01

Cell Selection

Lithium cells are selected for reliable peak output, stable capacity and practical cycle life.

02

Clamp Engineering

Heavy-current cables and intelligent clamp circuitry support efficient, controlled power transfer.

03

Cycle Validation

Charging and discharge tests check repeatability as the battery moves through normal use.

04

Temperature Testing

Products are evaluated for operation across the cold and heat drivers encounter in the field.

Support that stays with the product.

ANFLAG backs every model with practical coverage and direct help for setup, charging and compatibility.

Visit the ANFLAG Store
2 YearsHassle-free replacement
LifetimeTechnical assistance
24/7Expert support
Common questions

Know before you need it.

Which ANFLAG model fits my vehicle?+

Confirm that your vehicle uses a 12V starting system, then match the stated gas or diesel engine limit to your engine displacement. Contact support through Amazon if you are unsure.

How often should I recharge the jump starter?+

Check the charge level regularly and recharge the unit every few months, after use, or whenever the display shows a low reserve.

When should I use Force Start?+

Use Force Start only when the vehicle battery is deeply drained and the smart clamps do not enter normal ready mode. Follow the product manual carefully.

Who handles shipping and returns?+

Amazon handles ordering, delivery and approved returns. Most standard deliveries arrive within one to five business days, depending on location.

Roadside readiness starts here

Keep the next problem small.

Explore ANFLAG jump starters, inflators and portable power systems through our official Amazon storefront.

Shop ANFLAG on Amazon